An optimal production lot-sizing problem for an imperfect process with imperfect maintenance and inspection time length

NCU Institutional Repository > 管理學院 > 工業管理研究所 > 期刊論文 > Item 987654321/29527

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/29527

题名:	An optimal production lot-sizing problem for an imperfect process with imperfect maintenance and inspection time length
作者:	Wang,PC;Lin,YH;Chen,YC;Chen,JM
贡献者:	工業管理研究所
关键词:	INTEGRATED PRODUCTION;QUALITY MODEL;POLICIES;DESIGN
日期:	2009
上传时间:	2010-06-29 20:27:14 (UTC+8)
出版者:	中央大學
摘要:	This article develops an integrated model in considering the situations of an imperfect process with imperfect maintenance and inspection time for the joint determination of both economic production quantity (EPQ) and preventive maintenance (PM). This imperfect process has a general deterioration distribution with increasing hazard rate. Even with periodic PM, such a production system cannot be recovered as good as new. This means that the system condition depends on how long it runs. Also, the PM level can be distinct due to the maintenance cost. For convenience, it is assumed the age of system is reduced in proportional to the PM level. Further, during a production cycle, we need an inspection to see if the process is in control. This inspection might demand a considerable amount of time. In this article, we take PM level and inspection time into consideration to optimise EPQ with two types of out-of-control states. To see how the method works, we use a Weibull shock model to show the optimal solutions for the least costs.
關聯:	INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE
显示于类别:	[工業管理研究所 ] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	885	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing